Agilent Technologies 5000 Series manual Query Syntax OVLenable?

3Commands by Subsystem

Table 40 Overload Event Enable Register (OVL) (continued)

Bit	Description	When Set (1 = High = True), Enables:
7	Channel 2 Fault	Event when fault occurs on Channel 2 input.
6	Channel 1 Fault	Event when fault occurs on Channel 1 input.
5	---	(Not used.)
4	External Trigger OVL	Event when overload occurs on External Trigger
		input.
3	Channel 4 OVL	Event when overload occurs on Channel 4 input.
2	Channel 3 OVL	Event when overload occurs on Channel 3 input.
1	Channel 2 OVL	Event when overload occurs on Channel 2 input.
0	Channel 1 OVL	Event when overload occurs on Channel 1 input.

Query Syntax :OVLenable?

The :OVLenable query returns the current enable mask value contained in the Overload Event Enable Register.

Return Format <enable_mask><NL>

<enable_mask> ::= integer in NR1 format.

See Also • "Introduction to Root (:) Commands" on page 88

•":CHANnel<n>:PROTection" on page 156

•":EXTernal:PROTection" on page 178

•":OPEE (Operation Status Enable Register)" on page 105

•":OPERegister:CONDition (Operation Status Condition Register)" on page 107

•":OPERegister[:EVENt] (Operation Status Event Register)" on page 109

•":OVLRegister (Overload Event Register)" on page 113

•"*STB (Read Status Byte)" on page 81

•"*SRE (Service Request Enable)" on page 79

112 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference