Agilent Technologies 5000 Series manual Command Syntax DISPlayCLEar

Commands by Subsystem 3

:DISPlay:CLEar

(see page 530)

Command Syntax :DISPlay:CLEar

The :DISPlay:CLEar command clears the display and resets all associated measurements. If the oscilloscope is stopped, all currently displayed data is erased. If the oscilloscope is running, all of the data for active channels and functions is erased; however, new data is displayed on the next acquisition.

See Also • "Introduction to :DISPlay Commands" on page 161

•":CDISplay" on page 95

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 163