480 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference
5Obsolete and Discontinued Commands
:MEASure:TDELta
(see page 530)
Query Syntax :MEASure:TDELta?
The :MEASure:TDELta? query returns the time difference between the
Tstop marker (X2 cursor) and the Tstart marker (X1 cursor).
Tdelta = Tstop - Tstart
Tstart is the time at the start marker (X1 cursor) and Tstop is the time at
the stop marker (X2 cursor). No measurement is made when the
:MEASure:TDELta? query is received by the oscilloscope. The delta time
value that is output is the current value. This is the same value as the
front-panel cursors delta X value.
Return Format <value><NL>
<value> ::= time difference between start and stop markers in NR3 format
See Also •"Introduction to :MARKer Commands" on page 204
•"Introduction to :MEASure Commands" on page 218
•":MARKer:X1Position" on page 206
•":MARKer:X2Position" on page 208
•":MARKer:XDELta" on page 210
•":MEASure:TSTArt" on page 484
•":MEASure:TSTOp" on page 485
NOTE The :MEASure:TDELta command is an obsolete command provided for compatibility to
previous oscilloscopes. Use the :MARKer:XDELta command (see page 210) instead.