Agilent Technologies 5000 Series :TRIGger:UART:PARity

394 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference
3Commands by Subsystem
:TRIGger:UART:PARity
(see page 530)
Command Syntax :TRIGger:UART:PARity <parity>
<parity> ::= {EVEN | ODD | NONE}
The :TRIGger:UART:PARity command selects the parity to be used with
each message "byte" for the serial decoder and/or trigger when in UART
mode.
Query Syntax :TRIGger:UART:PARity?
The :TRIGger:UART:PARity? query returns the current UART parity setting.
Return Format <parity><NL>
<parity> ::= {EVEN | ODD | NONE}
See Also •"Introduction to :TRIGger Commands" on page 313
•":TRIGger:MODE" on page 319
•":TRIGger:UART:TYPE" on page 399