Agilent Technologies 5000 Series manual MEASureDEFine, MEASure Command DELay THResholds

3Commands by Subsystem

:MEASure:DEFine

(see page 530)

Command Syntax :MEASure:DEFine <meas_spec>

<meas_spec> ::= {DELay THResholds}

The :MEASure:DEFine command sets up the definition for measurements by specifying the delta time or threshold values. Changing these values may affect the results of other measure commands. The table below identifies which measurement results that can be affected by redefining the DELay specification or the THResholds values. For example, changing the THResholds definition from the default 10%, 50%, and 90% values may change the returned measurement result.

MEASure Command	DELay	THResholds
DUTYcycle		x
DELay	x	x
FALLtime		x
FREQuency		x
NWIDth		x
OVERshoot		x
PERiod		x
PHASe		x
PREShoot		x
PWIDth		x
RISetime		x
VAVerage		x
VRMS		x

:MEASure:DEFine :MEASure:DEFine DELay,<delay spec>

DELay Command Syntax

<delay spec> ::= <edge_spec1>,<edge_spec2>

<edge_spec1> ::= [<slope>]<occurrence> <edge_spec2> ::= [<slope>]<occurrence> <slope> ::= {+ -}

<occurrence> ::= integer

222 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference