Agilent Technologies 5000 Series CHANnelnVERNier, See Also Introduction to CHANneln Commands on

3Commands by Subsystem

:CHANnel<n>:VERNier

(see page 530)

Command Syntax :CHANnel<n>:VERNier <vernier value> <vernier value> ::= {{1 ON} {0 OFF}

<n> ::= {1 2 3 4} for the four channel oscilloscope models <n> ::= {1 2} for the two channel oscilloscope models

The :CHANnel<n>:VERNier command specifies whether the channel's vernier (fine vertical adjustment) setting is ON (1) or OFF (0).

Query Syntax :CHANnel<n>:VERNier?

The :CHANnel<n>:VERNier? query returns the current state of the channel's vernier setting.

Return Format <vernier value><NL>

<vernier value> ::= {0 1}

See Also • "Introduction to :CHANnel<n> Commands" on page 143

160 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference