92 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference
3Commands by Subsystem
:AUToscale:AMODE
(see page 530)
Command Syntax :AUToscale:AMODE <value>
<value> ::= {NORMal | CURRent}
The :AUTOscale:AMODE command specifies the acquisition mode that is
set by subsequent :AUToscales.
•When NORMal is selected, an :AUToscale command sets the NORMal
acquisition type and the RTIMe (real- time) acquisition mode.
•When CURRent is selected, the current acquisition type and mode are
kept on subsequent :AUToscales.
Use the :ACQuire:TYPE and :ACQuire:MODE commands to set the
acquisition type and mode.
Query Syntax :AUToscale:AMODE?
The :AUToscale:AMODE? query returns the autoscale acquire mode setting.
Return Format <value><NL>
<value> ::= {NORM | CURR}
See Also •"Introduction to Root (:) Commands" on page 88
•":AUToscale" on page 90
•":AUToscale:CHANnels" on page 93
•":ACQuire:TYPE" on page 132
•":ACQuire:MODE" on page 129