Agilent Technologies 5000 Series manual TRIGgerCANACKNowledge, Return Format valueNL

Obsolete and Discontinued Commands 5

:TRIGger:CAN:ACKNowledge

(see page 530)

Command Syntax :TRIGger:CAN:ACKNowledge <value>

<value> ::= {0 OFF}

This command was used with the N2758A CAN trigger module for 54620/54640 Series mixed- signal oscilloscopes. The InfiniiVision

5000 Series oscilloscopes do not support the N2758A CAN trigger module.

Query Syntax :TRIGger:CAN:ACKNowledge?

The :TRIGger:CAN:ACKNowledge? query returns the current CAN acknowledge setting.

Return Format <value><NL>

<value> ::= 0

See Also • "Introduction to :TRIGger Commands" on page 313

•":TRIGger:MODE" on page 319

•":TRIGger:CAN:TRIGger" on page 333

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 495