Agilent Technologies 5000 Series manual SYSTemTIME, Return Format timeNL

Commands by Subsystem 3

:SYSTem:TIME

(see page 530)

Command Syntax :SYSTem:TIME <time>

<time> ::= hours,minutes,seconds in NR1 format

The :SYSTem:TIME command sets the system time, using a 24- hour format. Commas are used as separators. Validity checking is performed to ensure that the time is valid.

Query Syntax :SYSTem:TIME? <time>

The :SYSTem:TIME? query returns the current system time.

Return Format <time><NL>

<time> ::= hours,minutes,seconds in NR1 format

See Also • "Introduction to :SYSTem Commands" on page 294

•":SYSTem:DATE" on page 295

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 301