Nokia 3108 manual Service commands, Font size setting, Call register Menu

M e n u f u n c t i o n s

•Data bearer. Select GPRS.

•Bearer settings, to edit the following items:

•GPRS access point. Enter the access point name to establish a connection to a GPRS network and press OK. Contact your network operator or service provider for the access point name.

•IP address. Enter the address, press for a dot, and press OK. You obtain the IP address from your network operator or service provider.

•Authentication type. Select Secure or Normal.

•User name. Enter the user name and press OK.

•Password. Key in the password and press OK.

•Allow adverts. You can allow or reject advertisements. This setting is not shown if the Allow multimedia reception is set to No.

To receive the multimedia connection settings as a text message

You may be able to receive the service settings as a text message from the network operator or service provider that offers the WAP service that you want to use. For more information, contact your network operator or service provider.

Font size setting

To select the font size for reading and writing messages, press Menu, and select Messages, Message settings, Other settings and Font size.

Service commands

Press Menu, and select Messages and Service commands. Enter and send service requests (also known as USSD commands), such as activation commands for network services, to your service provider (network service).

■Call register (Menu 2)

The phone registers the phone numbers of missed, received and dialled calls, and the approximate length and cost of your calls.

The phone registers missed and received calls only if the network supports these functions, the phone is switched on and within the network’s service area.

34 Copyright © 2004 Nokia. All rights reserved.