Agilent Technologies 5000 Series manual TRIGgerUARTQUALifier

3Commands by Subsystem

:TRIGger:UART:QUALifier

	(see page 530)
Command Syntax	:TRIGger:UART:QUALifier <value>
	<value> ::= {EQUal NOTequal GREaterthan LESSthan}
	The :TRIGger:UART:QUALifier command selects the data qualifier when
	:TYPE is set to RDATa, RD1, RD0, RDX, TDATa, TD1, TD0, or TDX for the
	trigger when in UART mode.
Query Syntax	:TRIGger:UART:QUALifier?
	The :TRIGger:UART:QUALifier? query returns the current UART trigger
	qualifier.
Return Format	<value><NL>
	<value> ::= {EQU NOT GRE LESS}
See Also	• "Introduction to :TRIGger Commands" on page 313
	• ":TRIGger:MODE" on page 319
	• ":TRIGger:UART:TYPE" on page 399

396 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference