Agilent Technologies 5000 Series manual 226

3Commands by Subsystem

Vtop. If you want to move the delay measurement point nearer to Vtop or Vbase, you must change the threshold values with the :MEASure:DEFine THResholds command.

Return Format <value><NL>

<value> ::= floating-point number delay time in seconds in NR3 format

See Also • "Introduction to :MEASure Commands" on page 218

•":MEASure:DEFine" on page 222

•":MEASure:PHASe" on page 234

226 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference