Agilent Technologies 5000 Series :DISPlay:PERSistence

168 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference
3Commands by Subsystem
:DISPlay:PERSistence
(see page 530)
Command Syntax :DISPlay:PERSistence <value>
<value> ::= {MINimum | INFinite}
The :DISPlay:PERSistence command specifies the persistence setting.
MINimum indicates zero persistence and INFinite indicates infinite
persistence. Use the :DISPlay:CLEar or :CDISplay root command to erase
points stored by infinite persistence.
Query Syntax :DISPlay:PERSistence?
The :DISPlay:PERSistence? query returns the specified persistence value.
Return Format <value><NL>
<value> ::= {MIN | INF}
See Also •"Introduction to :DISPlay Commands" on page 161
•":DISPlay:CLEar" on page 163
•":CDISplay" on page 95