Agilent Technologies 5000 Series manual TRIGgerLINID, TRIGgerLINTRIGger on, TRIGgerLINSOURce on

Commands by Subsystem 3

:TRIGger:LIN:ID

(see page 530)

Command Syntax :TRIGger:LIN:ID <value>

<value> ::= 7-bit integer in decimal, <nondecimal>, or <string> from 0-63 or 0x00-0x3f

<nondecimal> ::= #Hnn where n ::= {0,..,9 A,..,F} for hexadecimal <nondecimal> ::= #Bnn...n where n ::= {0 1} for binary <string> ::= "0xnn" where n ::= {0,..,9 A,..,F} for hexadecimal

	The :TRIGger:LIN:ID command defines the LIN identifier searched for in
	each CAN message when the LIN trigger mode is set to frame ID.
	This command is only valid when the automotive CAN and LIN serial decode option (Option
N O T E
	AMS) has been licensed.
	Setting the ID to a value of "- 1" results in "0xXX" which is equivalent to
	all IDs.
Query Syntax	:TRIGger:LIN:ID?
	The :TRIGger:LIN:ID? query returns the current LIN identifier setting.
Return Format	<value><NL>
	<value> ::= integer in decimal
Errors	• "- 241, Hardware missing" on page 501
See Also	• "Introduction to :TRIGger Commands" on page 313
	• ":TRIGger:MODE" on page 319
	• ":TRIGger:LIN:TRIGger" on page 371
	• ":TRIGger:LIN:SIGNal:DEFinition" on page 497
	• ":TRIGger:LIN:SOURce" on page 368

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 365