Agilent Technologies 5000 Series manual TIMebaseWINDowSCALe

3Commands by Subsystem

:TIMebase:WINDow:SCALe

(see page 530)

Command Syntax :TIMebase:WINDow:SCALe <scale_value>

<scale_value> ::= scale value in seconds in NR3 format

The :TIMebase:WINDow:SCALe command sets the delayed window horizontal scale (seconds/division). The main sweep scale determines the range for this command. The maximum value is one half of the :TIMebase:SCALe value.

Query Syntax :TIMebase:WINDow:SCALe?

The :TIMebase:WINDow:SCALe? query returns the current delayed window scale setting.

Return Format <scale_value><NL>

<scale_value> ::= current seconds per division for the delayed window

See Also • "Introduction to :TIMebase Commands" on page 302

•":TIMebase:RANGe" on page 306

•":TIMebase:POSition" on page 305

•":TIMebase:SCALe" on page 308

•":TIMebase:WINDow:RANGe" on page 311

312 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference