Agilent Technologies 5000 Series manual CHANnelnINPut, Instead

5Obsolete and Discontinued Commands

:CHANnel<n>:INPut

(see page 530)

Command Syntax :CHANnel<n>:INPut <impedance> <impedance> ::= {ONEMeg FIFTy}

<n> ::= {1 2 3 4} for the four channel oscilloscope models <n> ::= {1 2} for the two channel oscilloscope models

	The :CHANnel<n>:INPut command selects the input impedance setting for
	the specified channel. The legal values for this command are ONEMeg (1
	MΩ) and FIFTy (50Ω).
	The :CHANnel<n>:INPut command is an obsolete command provided for compatibility to
N O T E
	previous oscilloscopes. Use the :CHANnel<n>:IMPedance command (see page 148)
	instead.
Query Syntax	:CHANnel<n>:INPut?
	The :CHANnel<n>:INPut? query returns the current input impedance
	setting for the specified channel.
Return Format	<impedance value><NL>
	<impedance value> ::= {ONEM FIFT}

464 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference