Agilent Technologies 5000 Series manual Sbusuartbase

3Commands by Subsystem

:SBUS:UART:BASE

Command Syntax

N O T E

(see page 530)

:SBUS:UART:BASE <base>

<base> ::= {ASCii BINary HEX}

The :SBUS:UART:BASE command determines the base to use for the UART decode display.

This command is only valid on 4 (analog) channel oscilloscope models when the UART/RS-232 triggering and serial decode option (Option 232) has been licensed.

Query Syntax	:SBUS:UART:BASE?
	The :SBUS:UART:BASE? query returns the current UART decode base
	setting.
Return Format	<base><NL>
	<base> ::= {ASCii BINary HEX}
Errors	• "- 241, Hardware missing" on page 501
See Also	• "Introduction to :SBUS Commands" on page 277
	• ":TRIGger:UART Commands" on page 387

288 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference