Commands by Subsystem 3
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 409
:WAVeform:COUNt
(see page 530)
Query Syntax :WAVeform:COUNt?
The :WAVeform:COUNT? query returns the count used to acquire the
current waveform. This may differ from current values if the unit has been
stopped and its configuration modified. For all acquisition types except
average, this value is 1.
Return Format <count_argument><NL>
<count_argument> ::= an integer from 1 to 65536 in NR1 format
See Also •"Introduction to :WAVeform Commands" on page 403
•":ACQuire:COUNt" on page 127
•":ACQuire:TYPE" on page 132