Agilent Technologies 5000 Series manual CHANnelnOFFSet, Return Format offsetNL

Commands by Subsystem 3

:CHANnel<n>:OFFSet

(see page 530)

Command Syntax :CHANnel<n>:OFFSet <offset> [<suffix>] <offset> ::= Vertical offset value in NR3 format <suffix> ::= {V mV}

<n> ::= {1 2 3 4} for the four channel oscilloscope models <n> ::= {1 2} for the two channel oscilloscope models

The :CHANnel<n>:OFFSet command sets the value that is represented at center screen for the selected channel. The range of legal values varies with the value set by the :CHANnel<n>:RANGe and :CHANnel<n>:SCALe commands. If you set the offset to a value outside of the legal range, the offset value is automatically set to the nearest legal value. Legal values are affected by the probe attenuation setting.

Query Syntax :CHANnel<n>:OFFSet?

The :CHANnel<n>:OFFSet? query returns the current offset value for the selected channel.

Return Format <offset><NL>

<offset> ::= Vertical offset value in NR3 format

See Also • "Introduction to :CHANnel<n> Commands" on page 143

•":CHANnel<n>:RANGe" on page 157

•":CHANnel<n>:SCALe" on page 158

•":CHANnel<n>:PROBe" on page 152

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 151