210 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference
3Commands by Subsystem
:MARKer:XDELta
(see page 530)
Query Syntax :MARKer:XDELta?
The MARKer:XDELta? query returns the value difference between the
current X1 and X2 cursor positions.
Xdelta = (Value at X2 cursor) - (Value at X1 cursor)
Return Format <value><NL>
<value> ::= difference value in NR3 format.
See Also •"Introduction to :MARKer Commands" on page 204
•":MARKer:MODE" on page 205
•":MARKer:X1Position" on page 206
•":MARKer:X2Position" on page 208
•":MARKer:X1Y1source" on page 207
•":MARKer:X2Y2source" on page 209
NOTE If the front-panel cursors are off or are set to Binary or Hex Mode, the marker position
values are not defined. Make sure to set :MARKer:MODE to MANual to put the cursors in
the front-panel Normal mode.