Agilent Technologies 5000 Series :SAVE:IMAGe:AREA

266 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference
3Commands by Subsystem
:SAVE:IMAGe:AREA
(see page 530)
Command Syntax :SAVE:IMAGe:AREA <area>
<area> ::= {GRATicule | SCReen}
The :SAVE:IMAGe:AREA command sets the area that will be saved as part
of the image. If the :SAVE:IMAGe:FORMat is TIFF, the area is GRATicule.
Otherwise, it is SCReen.
Query Syntax :SAVE:IMAGe:AREA?
The :SAVE:IMAGe:AREA? query returns the selected image area.
Return Format <area><NL>
<area> ::= {GRAT | SCR}
See Also •"Introduction to :SAVE Commands" on page 263
•":SAVE:IMAGe[:STARt]" on page 265
•":SAVE:IMAGe:FACTors" on page 267
•":SAVE:IMAGe:FORMat" on page 268
•":SAVE:IMAGe:INKSaver" on page 269
•":SAVE:IMAGe:PALette" on page 270