Agilent Technologies 5000 Series manual WAVeformUNSigned, Query Syntax

3Commands by Subsystem

:WAVeform:UNSigned

	(see page 530)
Command Syntax	:WAVeform:UNSigned <unsigned>
	<unsigned> ::= {{0 OFF} {1 ON}}
	The :WAVeform:UNSigned command turns unsigned mode on or off for the
	currently selected waveform. Use the WAVeform:UNSigned command to
	control whether data values are sent as unsigned or signed integers. This
	command can be used to match the instrument's internal data type to the
	data type used by the programming language. This command has no effect
	if the data format is ASCii.
Query Syntax	:WAVeform:UNSigned?
	The :WAVeform:UNSigned? query returns the status of unsigned mode for
	the currently selected waveform.
Return Format	<unsigned><NL>
	<unsigned> ::= {0 1}
See Also	• "Introduction to :WAVeform Commands" on page 403
	• ":WAVeform:SOURce" on page 420

426 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference