Commands by Subsystem 3
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 367
:TRIGger:LIN:SIGNal:BAUDrate
(see page 530)
Command Syntax :TRIGger:LIN:SIGNal:BAUDrate <baudrate>
<baudrate> ::= integer in NR1 format
<baudrate> ::= {2400 | 9600 | 19200}
The :TRIGger:LIN:SIGNal:BAUDrate command sets the standard baud rate
of the LIN signal at 2400 b/s, 9600 b/s, or 19200 b/s. If a non- standard
baud rate is sent, the baud rate will be set to the next highest standard
rate.
Query Syntax :TRIGger:LIN:SIGNal:BAUDrate?
The :TRIGger:LIN:SIGNal:BAUDrate? query returns the current LIN baud
rate setting.
Return Format <baudrate><NL>
<baudrate> ::= integer = {2400 | 9600 | 19200}
See Also •"Introduction to :TRIGger Commands" on page 313
•":TRIGger:MODE" on page 319
•":TRIGger:LIN:TRIGger" on page 371
•":TRIGger:LIN:SIGNal:DEFinition" on page 497
•":TRIGger:LIN:SOURce" on page 368