Agilent Technologies 5000 Series manual Whats New in Version, New Commands

1What's New

What's New in Version 5.00

New features in version 5.00 of the InfiniiVision 5000 Series oscilloscope software are:

•Serial triggering and decode options are now available.

•The :SAVE and :RECall command subsystems.

•Changes to the :HARDcopy sommand subsystem to make a clearer distinction between printing and save/recall functionality.

More detailed descriptions of the new and changed commands appear below.

New Commands

Command	Description
:HARDcopy:STARt (see page 202)	Starts a print job.
:HARDcopy:APRinter (see page 196)	Sets the active printer.
:HARDcopy:AREA (see page 195)	Specifies the area of the display to print
	(currently SCReen only).
:HARDcopy:INKSaver (see page 199)	Inverts screen colors to save ink when printing.
:HARDcopy:PRinter:LIST (see page 201)	Returns a list of the available printers.
:RECall Commands (see page 257)	Commands for recalling previously saved
	oscilloscope setups and traces.
:SAVE Commands (see page 262)	Commands for saving oscilloscope setups and
	traces, screen images, and data.
:SBUS Commands (see page 276)	Commands for controlling oscilloscope
	functions associated with the serial decode
	bus.
:TRIGger:CAN Commands (see page 324)	Commands for triggering on Controller Area
	Network (CAN) version 2.0A and 2.0B signals.
:TRIGger:IIC Commands (see page 355)	Commands for triggering on Inter-IC (IIC)
	signals.
:TRIGger:LIN Commands (see page 364)	Commands for triggering on Local Interconnect
	Network (LIN) signals.
:TRIGger:SPI Commands (see page 372)	Commands for triggering on Serial Peripheral
	Interface (SPI) signals.
:TRIGger:UART Commands (see page 387)	Commands for triggering on UART/RS-232
	signals.
:WAVeform:SOURce:SUBSource (see	Selects subsource when :WAVeform:SOURce
page 424)	is SBUS (serial decode).

18 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference