Agilent Technologies 5000 Series manual MEASureVTIMe

Commands by Subsystem 3

:MEASure:VTIMe

(see page 530)

Query Syntax :MEASure:VTIMe? <vtime_argument>[,<source>] <vtime_argument> ::= time from trigger in seconds <source> ::= {CHANnel<n> FUNCtion MATH}

<n> ::= {1 2 3 4} for the four channel oscilloscope models <n> ::= {1 2} for the two channel oscilloscope models

The :MEASure:VTIMe? query returns the value at a specified time on the source specified with :MEASure:SOURce. The specified time must be on the screen and is referenced to the trigger event. If the optional source parameter is specified, the current source is modified.

N O T E This query is not available if the source is FFT (Fast Fourier Transform).

Return Format <value><NL>

<value> ::= value at the specified time in NR3 format

See Also • "Introduction to :MEASure Commands" on page 218

•":MEASure:SOURce" on page 240

•":MEASure:TEDGe" on page 242

•":MEASure:TVALue" on page 244

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 253