Agilent Technologies 5000 Series manual FUNCtion Commands Summary

Commands by Subsystem 3

:FUNCtion Commands

Control functions in the measurement/storage module. See "Introduction to :FUNCtion Commands" on page 182.

Table 47 :FUNCtion Commands Summary

Command	Query	Options and Query Returns
:FUNCtion:CENTer	:FUNCtion:CENTer?	<frequency> ::= the current
<frequency> (see	(see page 183)	center frequency in NR3 format.
page 183)		The range of legal values is from
		0 Hz to 25 GHz.
:FUNCtion:DISPlay {{0	:FUNCtion:DISPlay?	{0 1}
OFF} {1 ON}}	(see page 184)
(see page 184)
:FUNCtion:OFFSet	:FUNCtion:OFFSet?	<offset> ::= the value at center
<offset> (see	(see page 185)	screen in NR3 format.
page 185)		The range of legal values is
		+/-10 times the current
		sensitivity of the selected
		function.
:FUNCtion:OPERation	:FUNCtion:OPERation?	<operation> ::= {SUBTract
<operation> (see	(see page 186)	MULTiply INTegrate
page 186)		DIFFerentiate FFT SQRT}
:FUNCtion:RANGe	:FUNCtion:RANGe? (see	<range> ::= the full-scale
<range> (see	page 187)	vertical axis value in NR3
page 187)		format.
		The range for ADD, SUBT, MULT is
		8E-6 to 800E+3. The range for the
		INTegrate function is 8E-9 to
		400E+3.
		The range for the DIFFerentiate
		function is 80E-3 to 8.0E12
		(depends on current sweep speed).
		The range for the FFT function is
		8 to 800 dBV.
:FUNCtion:REFerence	:FUNCtion:REFerence?	<level> ::= the current reference
<level> (see	(see page 188)	level in NR3 format.
page 188)		The range of legal values is from
		400.0 dBV to +400.0 dBV
		(depending on current range
		value).
:FUNCtion:SCALe	:FUNCtion:SCALe? (see	<scale value> ::= integer in NR1
<scale	page 189)	format
value>[<suffix>] (see		<suffix> ::= {V dB}
page 189)

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 181