Agilent Technologies 5000 Series :SAVE:IMAGe[:STARt]

Commands by Subsystem 3
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 265
:SAVE:IMAGe[:STARt]
(see page 530)
Command Syntax :SAVE:IMAGe[:STARt] [<file_spec>]
<file_spec> ::= {<internal_loc> | <file_name>}
<internal_loc> ::= 0-9; an integer in NR1 format
<file_name> ::= quoted ASCII string
The :SAVE:IMAGe[:STARt] command saves an image.
See Also •"Introduction to :SAVE Commands" on page 263
•":SAVE:IMAGe:AREA" on page 266
•":SAVE:IMAGe:FACTors" on page 267
•":SAVE:IMAGe:FORMat" on page 268
•":SAVE:IMAGe:INKSaver" on page 269
•":SAVE:IMAGe:PALette" on page 270
•":SAVE:FILename" on page 264
•":RECall:IMAGe[:STARt]" on page 259
NOTE If a file extension is provided as part of a specified <file_name>, it must match the
extension expected by the format specified in :SAVE:IMAGe:FORMat.
NOTE The <internal_loc> option is only valid if :SAVE:IMAGe:FORMat is TIFF.