Agilent Technologies 5000 Series manual 114

3Commands by Subsystem

Table 41 Overload Event Register (OVLR) (continued)

Bit	Description	When Set (1 = High = True), Indicates:
4	External Trigger OVL	Overload has occurred on External Trigger input.
3	Channel 4 OVL	Overload has occurred on Channel 4 input.
2	Channel 3 OVL	Overload has occurred on Channel 3 input.
1	Channel 2 OVL	Overload has occurred on Channel 2 input.
0	Channel 1 OVL	Overload has occurred on Channel 1 input.

Return Format	<value><NL>
	<value> ::= integer in NR1 format.
See Also	• "Introduction to Root (:) Commands" on page 88
	• ":CHANnel<n>:PROTection" on page 156
	• ":EXTernal:PROTection" on page 178
	• ":OPEE (Operation Status Enable Register)" on page 105
	• ":OVLenable (Overload Event Enable Register)" on page 111
	• "*STB (Read Status Byte)" on page 81
	• "*SRE (Service Request Enable)" on page 79

114 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference