Agilent Technologies 5000 Series manual TRIGgerIICPATTernDATa2

3Commands by Subsystem

:TRIGger:IIC:PATTern:DATa2

	(see page 530)
Command Syntax	:TRIGger:IIC:PATTern:DATa2 <value>
	<value> ::= integer or <string>
	<string> ::= "0xnn" where n ::= {0,..,9 A,..,F}
	The :TRIGger:IIC:PATTern:DATa2 command sets IIC data 2. The data value
	can range from 0x00 to 0x0FF (hexadecimal). Use the don't care data
	pattern (- 1 or 0xFFFFFFFF) to ignore the data value.
Query Syntax	:TRIGger:IIC:PATTern:DATa2?
	The :TRIGger:IIC:PATTern:DATa2? query returns the current pattern for IIC
	data 2.
Return Format	<value><NL>
See Also	• "Introduction to :TRIGger Commands" on page 313
	• ":TRIGger:IIC:PATTern:ADDRess" on page 356
	• ":TRIGger:IIC:PATTern:DATA" on page 357
	• ":TRIGger:IIC:TRIGger[:TYPE]" on page 362

358 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference