Agilent Technologies 5000 Series manual TRIGgerEDGELEVel, TRIGgerEDGESOURce on

Commands by Subsystem 3

:TRIGger[:EDGE]:LEVel

	(see page 530)
Command Syntax	:TRIGger[:EDGE]:LEVel <level>
	<level> ::= <level>[,<source>]
	<level> ::= 0.75 x full-scale voltage from center screen in NR3 format
	for internal triggers
	<level> ::= 2 V with probe attenuation at 1:1 in NR3 format for
	external triggers
	<source> ::= {CHANnel<n> EXTernal}
	<n> ::= {1 2 3 4} for the four channel oscilloscope models
	<n> ::= {1 2} for the two channel oscilloscope models
	The :TRIGger[:EDGE]:LEVel command sets the trigger level voltage for the
	active trigger source.
	If the optional source is specified and is not the active source, the level on the active source
N O T E
	is not affected and the active source is not changed.
Query Syntax	:TRIGger[:EDGE]:LEVel? [<source>]
	The :TRIGger[:EDGE]:LEVel? query returns the trigger level of the current
	trigger source.
Return Format	<level><NL>
See Also	• "Introduction to :TRIGger Commands" on page 313
	• ":TRIGger[:EDGE]:SOURce" on page 346

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 343