Agilent Technologies 5000 Series manual HARDcopyFFEed, HARDcopyFACTors on

3Commands by Subsystem

:HARDcopy:FFEed

	(see page 530)
Command Syntax	:HARDcopy:FFEed <ffeed>
	<ffeed> ::= {{OFF 0} {ON 1}}
	The HARDcopy:FFEed command controls whether a formfeed is output
	between the screen image and factors of a hardcopy dump.
	ON (or 1) is only valid when PRINter0 or PRINter1 is set as the
	:HARDcopy:FORMat type.
Query Syntax	:HARDcopy:FFEed?
	The :HARDcopy:FFEed? query returns a flag indicating whether a formfeed
	is output at the end of the hardcopy dump.
Return Format	<ffeed><NL>
	<ffeed> ::= {0 1}
See Also	• "Introduction to :HARDcopy Commands" on page 193
	• ":HARDcopy:STARt" on page 202
	• ":HARDcopy:FACTors" on page 197
	• ":HARDcopy:INKSaver" on page 199
	• ":HARDcopy:PALette" on page 200

198 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference