Xerox WorkCentre C226 manual When using the Dadf, When using the document glass

Copier Operation

2. Designate the type of originals to be copied: 1-sided or 2-sided.

Pamphlet Copy				Cancel		OK
		Original
					Left	Right
	1-Sided		2-Sided		Binding	Binding

Select the [2-SIDED] key when you are using the DADF to scan a two-sided original.

3.Select the binding position (left binding or right binding) and touch the [OK] key (inside [OK] key) on the PAMPHLET COPY setting screen.

Return to the IMAGE EDIT menu screen.

Cancel OK

Left Right

ed Binding Binding

4.Touch the [OK] key on the IMAGE EDIT menu screen. Return to the SPECIAL MODES screen.

5.Touch the [OK] key on the SPECIAL MODES screen. Return to the main screen of copy mode.

6.Place the original in the DADF tray or on the document glass. (pages 2-4 to 2-10)

7.Ensure that the desired paper size has been automatically selected based on the original size.

To select another size paper, touch the [More...] key in the Copy Ratio display, then select the desired size and touch the [AUTO IMAGE] key. The appropriate copy ratio will be selected automatically based on the original size and the paper size. (See step 2 on page 2-29.)

8.Make all other desired settings such as exposure or the number of copies, and press the [START] key.

When using the DADF:

Copying will start after all originals have been scanned. (The next step is not needed.)

When using the document glass:

Replace the original with the next original and press the [START] key. Repeat this operation until all originals have been scanned. Then touch the [READ-END] key.

When the pamphlet copy function is set, the two-sided copying mode will be automati- cally selected.

To cancel the pamphlet copy function, touch the [CANCEL] key on the pamphlet copy setting screen (step 2).

2-72 Xerox WorkCentre C226 User Guide