Xerox WorkCentre C226 manual Manual Polling, Touch the Special Modes key

Transmission and Reception Using the Polling Function

4.When you have finished entering the destination(s), press the [BLACK COPY START] key.

"JOB STORED." appears in the touch panel.

The fax is received from the other machine and printed out.

NOTE: To cancel the operation

Press the [JOB STATUS] key and then cancel the operation. (See “Cancelling a Fax Transmission” on page 5-27.)

Manual Polling

A document should not be loaded in the machine when the following operation is per- formed. Manual polling is begun on the signal of the other party.

1. Touch the [SPEAKER] key in fax mode, and dial the number of the other machine.

A one-touch key or the [REDIAL] key can also be used.

Speaker Re

Fax Memory:100%	Addr
Auto Reception
	Dire

Sub

2. Touch the [SPECIAL MODES] key.

Add

Auto Reception	Dire
	Sub Ad

If the address directory screen appears, touch the [CON- DITION SETTINGS] key to display the condition settings screen.

Special Modes Address

3.When you hear the fax tone from the other machine, touch the [POLLING] key. "JOB STORED." appears in the touch panel.

erPolling

l Page

Scan

Program

Polling reception begins.

Your machine prints the fax after receiving it from the sending machine.

NOTE: Serial polling cannot be performed manually. When polling reception ends, repeat steps 1 through 4.

Xerox WorkCentre C226 User Guide 5-37