Xerox WorkCentre C226 manual Troubleshooting, Problem Check Solution or cause

		Troubleshooting
Problem	Check	Solution or cause
Copying/printing	The number of sheets placed on the	Do not place more than the maximum
	Bypass Tray exceeds the maximum num-	number of sheets.
on paper from the	ber.
Bypass Tray is
	The Bypass Guide is not adjusted to the	Adjust the Bypass Guide to the size of the
skewed.
	size of the loaded paper.	loaded paper.
	The paper size and paper type have not	Be sure to set the paper size and paper
	been set.	type when using special size or special
		type papers. (page 1-35)
Paper from the
	The number of sheets placed on the	Do not place more than the maximum
Bypass Tray mis-
	Bypass Tray exceeds the maximum num-	number of sheets.
feeds.
	ber.
	The Bypass Guide is not adjusted to the	Adjust the Bypass Guide to the size of the
	size of the loaded paper.	loaded paper.
Printing stops	If too many pages collect on the output
	tray, the tray full sensor activates and	Remove the paper from the output tray.
before the job is	stops printing.
finished.
	You have run out of paper.	Load paper. (page 1-21)
Smudges on	Does a message appear indicating the	Please contact the your dealer as soon
printed sheets.	need for maintenance?	as possible.
Colour deviations	When printing in colour, character and	Perform colour registration as explained
occur.	colour deviations appear.	in the “Key Operator Programs” section of
		the WorkCentre C226 System Adminis-
		tration Guide.
The displayed		When you change the paper size in the
paper size differs	The display of the tray's paper size slide	tray, be sure to adjust the paper size slide
from the loaded	differs from the paper size in the tray.	on the tray to the new paper size.
paper size.		(page 1-22)
When printing on a		When using a special size of paper, set
special size of		the correct paper size in millimetres in the
paper, part of the	The paper size setting is not set correctly	paper tray settings of the custom settings
printed image is	in the paper tray settings of the custom	(see page 1-33).If the paper size setting
missing.	settings.	is not correct, part or all of the image may
		not print (this depends on the options
		installed).
When printing on a		When using a special size of paper, set
special size of		the correct paper size in millimetres as
paper using the	The paper size is not set correctly in the	explained in step 6 on page 1-37.If the
Bypass Tray, part	special size settings for the Bypass Tray.	paper size setting is not correct, part or all
of the printed		of the image may not print (this depends
image is missing.		on the options installed).

Xerox WorkCentre C226 User Guide 1-57