Setting Originals, When using the Dadf | Xerox WorkCentre C226

Copier Operation

Size and weight of acceptable originals

		A5 or
	Original size: 5-1/2" x 8-			1/2"
				1/2"			A3 or
							A3 or
							11" x 17"
	(148 x 210 mm)
	(148 x 210 mm)					(297 x 420 mm)
	Weight (thickness):


	56g/m2 or 15 lbs.					90g/m2 or 24 lbs.

g/m2 ... Weight of a sheet of paper of 1 m2

Notes on use of the DADF

•Use originals within the specified size and weight ranges. Use of originals out of the specified range may cause an original misfeed.

•Before loading originals into the DADF tray, be sure to remove any staples or paper clips.

•If originals have damp spots from correction fluid, ink or glue from pasteups, be sure they are dried before they are fed. If not, the interior of the DADF or the doc- ument glass may be soiled.

•To prevent incorrect original size detection, original misfeeds or smudges on cop- ies, use the following as a guide for feeding originals.

Transparency film, tracing paper, carbon paper, thermal paper or originals printed with thermal transfer ink ribbon should not be fed through the DADF. Originals to be fed through the feeder should not be damaged, crumpled or folded or have loosely pasted paper on them or cutouts in them.

Setting Originals

When using the DADF

1. Adjust the original guides to the size of the originals.

2-4	Xerox WorkCentre C226 User Guide

Image 108

Xerox WorkCentre C226 manual Setting Originals, Size and weight of acceptable originals, When using the Dadf

Contents

Xerox WorkCentre C226 User Guide Warranty Trademark information Table of contents Introduction Before Using the Product Managing the MachineXerox WorkCentre C226 User Guide Peripheral Devices Before Making Copies Basic Procedure for Making Copies Convenient Copy Functions Machine Maintenance for Copying Basic Printing ProceduresSetting the Printer Driver Properties Xerox WorkCentre C226 User Guide Vii Printer Configuration Settings Web Pages in the PrinterPrinting from the Operation Panel Key Operator Programs Troubleshooting Appendix Condition Setting Screen of Scanner Mode Scanning SettingsSending an Image Specifications Before Using the FAX Feature Transmission Using F-Codes Basic OperationsAdvanced Transmission Methods Xii Xerox WorkCentre C226 User Guide Convenient Methods of Use ProgrammingXerox WorkCentre C226 User Guide Xiii Xiv Xerox WorkCentre C226 User Guide Safety Notes Operator Accessible Areas MaintenanceCleaning Your Product Electrical Supply Operational Safety Information Do TheseDisconnect Device Xerox WorkCentre C226 User Guide Xvii Maintenance Information Ozone Safety InformationFor Consumables Do Not Do These Product Safety Certification Radio Frequency EmissionsXerox WorkCentre C226 User Guide Xix FAX Send Header Requirements CE Mark Data Coupler Information Xerox WorkCentre C226 User Guide Xxi Canada EuropeXxii Xerox WorkCentre C226 User Guide USA Energy Star Canada Environmental ChoiceXerox WorkCentre C226 User Guide Xxiii Europe Energy Xxiv Xerox WorkCentre C226 User Guide Xerox WorkCentre C226 User Guide Xxv Other countries Xxvi Xerox WorkCentre C226 User Guide Before Using the Product Installation Requirements General Information Installation Requirements Moving this machineIf the machine has been placed on a stand/1-Tray Unit If the machine is to be left unused for a long time Introduction Introduction Original and paper sizes Meaning of R in original and paper size indications Main Features Main Features Energy saving features Preheat modeAuto power shut-off mode Part Names and Functions ExteriorPart Names and Functions Operation panel Stand/1-Tray UnitTray Unit Duplex Bypass/ See Inverter Unit and exit tray Interior Part names and functions of peripheral devices Other optional equipment Ready indicator Data indicator Operation panel Settings key Start key Clear ALL keyStart key Using the touch panel Touch panelBeep tone Selection of function Copier feature Auditing Mode Paper Empty in the job status display Using the machine when the auditing mode is enabled Auditing ModeAccount counter is enabled only for the colour copy mode When the copy job is finished, press the key ACC.#-C key Ready To Copy Please See Your Key Operator For Assistance Managing the Machine Loading PaperLoading paper in Paper Tray Loading Paper Changing the paper size in Paper Tray Loading paper in the Bypass Tray General Information When loading paper in the Bypass Tray or closing Tray, close the paper cover as shown Setting envelopes or postcards Printing onto envelopes or postcardsLoading postcards Loading envelopes Fusing unit pressure adjusting levers Printing onto envelopes Loading paper in the stand/1-Tray Unit/3-Tray Unit Upper tray / middle tray / lower tray Specifications stand/1-Tray Unit/3-Tray Unit Loading paper in the Duplex Module/2-Tray UnitUpper tray Middle and lower paper trays Specifications Duplex Module/2-Tray Unit Specifications for paper trays Tray No More information on plain paper More information on special media that can be usedPaper in AB system Paper in inch system Setting the paper type except the Bypass Tray Paper that can be used for automatic two-sided printingPaper tray selection screen will appear Setting the paper size when an extra size is loaded Touch the OK key to complete the setting Setting the paper type and paper size in the Bypass Tray Heavy Paper1 106g/m2 200g/m2 Custom Settings Clock adjustTotal count Display contrast Tray settings Receive modeFax data forward Keyboard select Operation procedure common to all custom settings More information on setting proceduresDetailed descriptions for program settings start on About the settings Total count Clock adjust Tray settingsDisplay contrast List print Replacing the Toner Cartridges Toner Replacing the Toner Cartridges Remove the protective material from the new toner cartridge General Information Storing Supplies Proper storageStoring Supplies Supply and Consumables Misfeed Removal Misfeed Removal Guidance Misfeed in the paper feed areaMisfeed in Tray Misfeed Removal Misfeed in the Bypass Tray Misfeed in the transport area, fusing area, and exit area Transport area Fusing area Models without the Duplex Bypass/Inverter UnitUpper exit tray Misfeed Removal Misfeed in the stand/1-Tray Unit Misfeed in the 3-Tray Unit General Information Misfeed in the upper or lower tray Problem Check Solution or cause Troubleshooting Problem Check Solution or cause Problem Check Solution or cause Peripheral Devices Saddle Stitch FinisherPart names and functions Saddle Stitch Finisher Using the Saddle Stitch Finisher Staple cartridge replacement and staple jam removal Staple cartridge replacementRemove the empty staple box General Information Staple jam removal Remove the staple box Saddle Stitch Finisher Push the Saddle Stitch Finisher back against the main unit Misfeed in the Saddle Stitch Finisher Open the top cover General Information Saddle Stitch Finisher Troubleshooting Saddle Stitch Finisher problems Check the list below before calling for service Problem Check Solution or cause Stapling position quick reference guide for duplex output Top binding Relation between print image and saddle stitch High Capacity Feeder Part nameLoading paper in the High Capacity Feeder Top cover Misfeed in the High Capacity Feeder High Capacity Feeder General Information High Capacity Feeder General Information Xerox WorkCentre C226 User Guide Before Making Copies Part Names and Functions The Dadf Touch Panel main screen of copy mode Copier Operation Acceptable originals Dadf Setting Originals Size and weight of acceptable originalsWhen using the Dadf Adjust the original guides to the size of the originals When using the document glass Setting OriginalsHow to place the original Original size detection function Operator programs Standard original setting orientation Example Selecting the Original Size Automatic copy image rotation rotation copying Using the Dadf Using the document glass Selecting the Original Size Storing, Deleting, and Using Original Sizes Storing or deleting an original sizeTouch the Original tab Touch the Custom Size key Touch the STORE/DELETE key Storing, Deleting, and Using Original Sizes Enter X and then touch the key to enter Y. a width64 to 432 mm can be entered in X, and a length To 297 mm can be entered in Y Using a Stored Original Size Touch the OK key Stored original size is called up Basic Procedure for Making Copies Normal CopyingCopying from the Dadf Sided copies of 1-sided originals A4 Plain B4 Recycled A3 Plain Normal Copying Copy mode output restrictions Normal Copying Copy output sort and group About the offset function Automatic two-sided copying from the Dadf Touch Offset Touch OKSelecting the output tray Turning on the offset function Following two-sided modes can be Selected Copying from the document glass Set an original on the document glass pages 2-4 to How to place the original Normal Copying Automatic two-sided copying from the document glass Exposure Adjustments Exposure AdjustmentsExample TEXT/PRTD.PHOTO key is selected Original type Contents of the original Normally this setting is selected. WhenExposure is automatically adjusted to Obtain the best image quality. When a Making a copy of a copy Reduction/Enlargement/Zoom Automatic selection auto image Reduction/Enlargement/Zoom Manual selection 100 Menu To return the ratio to 100% XY Zoom Touch the X key 64% Special Papers Special Papers Colour adjustment menu Convenient Copy Functions Special ModesSpecial Modes Inserts key Common operation procedure for using the special functions ScreenTouch the Special Modes tab Margin shift Touch the key for the desired special mode. ExampleTo set the margin shift function Touch the Margin Shift key on the Special Modes screen Set the shift amount as needed and touch the lower OK keyAbout the steps that follow Erase Screen to indicate that the function is turned on Dual page copy When copying book originals Touch the Dual page Copy key on the Special Modes screen Centring This function can be used to reduce a larger sized origiNal image and centre it on a copy of smaller paper size As well as centre a smaller original onto a larger sized Transparency film with insert sheets Insert sheets must be the same size A4 or A4R2 x 11 or 8-1/2 x 11R as the transpar Ency film Auto Covers Copying onto a cover Not copying onto a cover Touch the Covers key on the Special Modes screen Select cover placement See pages 2-13through Touch the key to switch to the second Special Modes screen ReverseOriginals with large black areas which use a large amount Consumption Colour Adjustments Menu Colour Adjustments Menu RGB Adjust Select a colour from R RED, G GREEN, and B BlueKey to weaken the colour Sharpness Suppress background Colour balance About the steps that follow Brightness setting screen will appear Adjust the brightnessBrightness Intensity setting screen will appear Adjust the intensityIntensity Image Edit Menu Image Edit MenuSingle Produces copies with a selected single colour Single colour Select the desired colour Mirror image Touch the Mirror Image key on the Image Edit menu screen Photo Repeat See pages 2-21through Multi shot Touch the Multi Shot key on the Image Edit menu screen On the copy A3 11 x 17 Full-bleed Lines are added around the borders of the images Touch the A3 FULL-BLEED key on the Image Edit menu screen Multi-page enlargement Overlap of sections of image Inch system About the steps that follow Pamphlet copy Pamphlet copy icon , etc. will also appearUpper left corner of the screen to indicate that the func Tion is turned on When using the Dadf When using the document glass Job Program Memory Storing a job programJob Program Memory Recalling a job program Make all copier selections to be storedNumber of copies cannot be stored Deleting a stored job program Played in to exit the job program mode CEL key is touched, the screen in will return butProgram will not be deleted. If no other programs are To be deleted, touch the Exit key on the screen dis Interrupting a Copy Run Interrupting a Copy Run Copier Operation Machine Maintenance for Copying Removing an Original MisfeedRemoving a misfed original from the Dadf Removing an Original Misfeed Check location B Check location C User Maintenance for copying User Maintenance for copying Cleaning the Original Scanning Area Printed Photo Problem Check Solution or cause Basic Printing Procedures Setting the Printer DriversChange the settings using the printer properties Windows 95 / 98 / Me Selecting a Color Mode setting Windows NT4.0 / 2000 / XP / ServerPrinter Operation Using the Help file to view explanations of the settings Setting the Printer DriversOpening Help in Windows Click Help to display Printing in black and white Setting the Printer Drivers Printer Operation Automatic switching between colour and black and white Printer Operation Setting the Printer Drivers Printing in colour Setting the Printer Drivers Printing using optional peripheral equipment Setting the Printer Drivers Printer Operation Setting the Printer Driver Properties Selecting Printing FunctionsSelecting Printing Functions Frequently used settings Colour mode displayCopies Collate Document Style Tiled PamphletUp Pamphlet User Settings Up PrintingBorder Save Configure settings for staple or punch finishing Auto Job Control reviewFinishing Binding Edge Staple sort mode Saddle stitch functionStaple Stapling positions Top left Hole punching only if a Hole Punch Module is installed Offset modePunch No Offset Retention Normal Print Hold After PrintHold Before Print Proof Print Defaults PIN 5-digit identification numberNotify Job End Default Job ID Account NumberUser Name Paper settings Job NameAlways Use This ID Paper Size Custom Correct WrongFit To Paper Size Fit To Paper Selection Paper SourcePaper Type Tray Status Advanced settings PCL5cTransparency Inserts Image Quality Resolution Settings Select 300 dpi or 600 dpi Default setting 600 dpiGraphics Mode Margin Shift PostScript Compress Options Job CompressionBitmap Compression See the explanation for Overlays on Watermark settings Text SizeAngle Edit Fonts Color settings Original Type Preview of document type This shows a preview of the document type selectedTable of document type previews Color Mode Use this item to adjust the brightness and contrast Print PriorityAll Text to Black Image Contrast Color BalanceSaturation Red Strength Printer Configuration Through the Network Environment required for accessing Web pagesAccessing Web pages and displaying help Web Pages in the Printer Printer Configuration Through the Network Items and outline of menu frame of Web pages System Information Image Send ManagementDestination Device Setup PasswordSender Network Scanning Printer Configuration Settings Making Configuration SettingsNetwork Setup Paper Select Condition Settings Making Configuration Settings Default settings Default paper sizeDefault output tray Copies PCL settings Default paper typePCL symbol set setting PCL font settings Printing from the Operation Panel Hold Job List Hold Job List Key Operator Programs Key operator program list Initialize and/or store settings Key operator program listProgram name Auto colour calibration Procedure for using key operator programs Touch the Printer Settings key Procedure for using key operator programs Key operator program menu Level Description of Setting Programs Printer settingsDefault settings Interface settings Network settings TimeoutIP address setting Enable TCP/IP Colour adjustments Enable EtherTalkEnable NetBEUI Reset the NIC Initialize and/or store settings Restore factory defaults Store current configuration Restore configuration Troubleshooting Degrees with Respect to paper Paper type Keys Checking the IP address Touch the Printer Test page key Screen and printing begins. To cancel printing, touch Cancel keyAppendix Disabling of notice page printing Print Area Print area of this product is shown below PCL symbol set Symbol setPrint Area Printer Operation Xerox WorkCentre C226 User Guide Options required to use the network scanner function Network Scanner Operation About the Network Scanner Function About the Network Scanner Function Accessing Web Pages About the Web About the WebWeb Basic Settings for Network Scanning Enable scanner delivery methods Enable Scanner Delivery toEnabling user authentication Advanced Setup Network Scanning Setup screen Mail Server and DNS Server Settings Basic Settings for Network Scanning Smtp Setup Description DNS Setup Description Description Setting Up Destination Information Setting Up Destination Information Storing destinations for Scan to E-mailDrop down list Check box for Frequently-Used Storing destinations for Scan to FTP Description Storing Groups Scan to E-mail Editing and deleting programmed transmission destinations Storing Sender Information Scan to E-mail Storing a Custom Directory Editing and deleting programmed senders informationStoring a Custom Directory Condition Setting Screen of Scanner Mode Protecting Information Programmed in the Web Page Passwords Condition setting screen Protecting Information Programmed in the Web Page Passwords Mode and fax mode KeyDisplay Address directory screen Mail Destination Management Switching keys Search keyKey Index keys Sending an Image Basic Transmission MethodBasic Transmission Method Up to 20 senders can be stored using the Web page. When transmitting by Scan to E-mail Touch the one-touch key for the desired destination About pressing the Start key in the following procedure Using the Dadf Destination Input Methods Destination address manual entryPerform steps 1 through 9 of Basic Transmission Method on Touch the E-MAIL Address key Enter the e-mail address Select the file type and the compression mode Select where you put the destinationDestination Input Methods Scanning in colour Destination address entry with global address search Enter a keyword for search Touch the Search key You will return to the condition setting screen Scanning and Transmitting a Two-sided OriginalSelect the destination type Scanning and Transmitting a Two-sided Original Scanning Settings Manually Setting the Scanning SizeTouch the Manual key Manually Setting the Scanning Size Touching the inner OK key in the step above returnsYou to step Selected size appears in the top half of the Original key When Auto is selected in step Selecting the ExposureChange the exposure Selecting the Resolution Change the resolutionSelecting the Resolution When Manual is selected in step Touch the desired resolution key Selecting the File Format File format settings for colour scanning File format settings for black and white scanningSelecting the File Format Remove the checkmark from the Programmed checkbox Touch the OK key You will return to the initial screen Cancelling an E-Mail/FTP Transmission Storing, Editing, and Deleting from the Touch Panel Storing One-Touch Keys Only Addresses for Scan to E-mailTouch the Direct Address key Storing One-Touch Keys Only Addresses for Scan to E-mail Touch the Individual keyTouch the Name key Touch the Initial key Touch the Index key Touch an index keyEnter the e-mail address of the destination Check the file format and the compression mode Settings for colour scanningCompression mode LOW/MEDIUM*/HIGH Settings for black and white scanning Editing and Deleting One-Touch Keys Touching the Exit key returns you to the screen of onTouch the one-touch key you wish to edit or delete Editing and Deleting One-Touch Keys Steps 3 throughFollowing steps are for deleting a one-touch key Touch the Delete key Programming a Group Key Programming a Group Key Editing and Deleting Group Keys Touch the group key you wish to edit or delete Editing and Deleting Group Keys ThroughFollowing steps are for deleting a group key If you wish to delete another group key, repeat steps 3, 6, Storing Sender Information Touch the Store keyTouch the Sender Name key Editing and Deleting Sender Information Editing and Deleting Sender Information When touched, the letter entry screen appears Storing a Group IndexEdit or delete the sender Printing Programmed Information Printing Programmed InformationTouch the Sending Address List Scanner key To cancel printing, touch the Cancel key Image cannot be scanned Moiré stripe pattern appears on the scanned imageScanned image is fuzzy or has smudges Scanned image is clipped Received image data cannot be opened Recipient does not receive transmitted dataTransmission takes a long time If a Transmission Error Occurs Error Code TableResolution STANDARD, HIGHER, Highest Error Code Description of the Error Checking the IP Address Checking the IP Address Important Points When Using Scan to E-Mail Approx KB Tiff High G4 format Jpeg Medium compression Key Operator Programs Using the Key Operator Programs Setting Programs Network scanner settingsSetting Programs Default display settings Number of direct address keys displayed settingInitial resolution setting Scan complete sound setting Default sender setCompression mode at broadcasting Initial file format setting Scanner mode timeout after last scan Default exposure settingsMaximum size of e-mail attachments Disable of address direct entry Specifications TCP/IP, UDP/IP Scanning margins Scanning margins Network Scanner Operation Xerox WorkCentre C226 User Guide To Use this Product Correctly as a Fax Device Line connectionFor United Kingdom For Australia Important Safety Information Fax power switchSettings and programming Lithium battery Before Using the FAX Feature Points to Check and Program After InstallationMake sure the fax power switch is turned on Make sure the correct date and time have been set Connecting an Extension Phone Connecting an Extension Phone Look at the Operation Panel Look at the Operation Panel Fax Mode Condition Settings Screen Start Condition settings screen Fax Mode Condition Settings ScreenMode Modes Settings Address directory screen alphabetically ordered Originals that Can Be Faxed Original sizesScanning area of original Automatic reduction of faxed document Using the Dadf Using the Document GlassLoading a Document Loading a Document Checking the Size of a Loaded Original Original key. Check the key to makeSure that the original size has been correctly Detected Sizes that can be selected are displayed Touch the desired original size key Selecting Resolution and Exposure Settings Selecting the ResolutionChange the resolution Resolution settings Selecting Resolution and Exposure SettingsStandard Ultra fine Selecting the Exposure Change the exposureExposure, touch Key. To return to auto Exposure settings Convenient Dialing MethodsOne-touch dialing Group dialing On-hook dialing Basic Procedure for Sending Faxes Basic OperationsSending a Fax Sending a Fax If needed, adjust the resolution setting see If needed, adjust the exposure setting seeEntering a Pause Using the Dadf Using the document glass Refer to page 5-9 for information on using the address Continue from of Basic Procedure for Sending FaxesDirectory screen Faxing a Two-Sided Original Quick On-line Storing transmission jobs memory transmissionSide are booklets, and two-sided originals That are bound at the top are tablets If a transmission error occurs If the receiving party is busyImage rotation Priority Transmission of a Stored Job Cancelling a Fax Transmission Cancelling On-Hook DialingCancelling a Fax Transmission Press the JOB Status key Touch the FAX JOB key Receiving Faxes Receiving a FaxNumber of rings Machine will ring* and reception will automatically begin Advanced Transmission Methods If received data cannot be printed Using Broadcast Transmission Using Broadcast Transmission Dial Ann ot b e om ittedDial Can be omitted Check the destinations Setting Up a Timer Transmission Transmission and Reception Using the Polling Function Transmission and Reception Using the Polling Function PollingPolling memory Using the Polling Function Polling key is highlighted and the polling icon appears Manual Polling Touch the Special Modes key Using Polling Memory Touch the Data Store key Printing document data in the Public Box Touch the Print Data key Deleting document data from the Public Box Touch the Delete Data keyTouch the Public BOX key Message screen appears Restricting polling access polling security Own Number SendingExample of fax page printed out by the receiving machine 11/JUN/2004/FRI Faxing a Divided Original Dual Page Scan Position of senders informationFaxing a Divided Original Dual Page Scan Outside scanned data Programming Frequently Used Operations Selecting Dual Page ScanPress the Clear ALL key Using a Program Programming Frequently Used Operations Transfer instruction Using the Transfer Function Program the fax number of the transfer destination Press the Custom Settings key Touch the FAX Data Forward key Transferring received data Transmission Using F-Codes Transmission Between Machines Supporting F-codesTransmission Between Machines Supporting F-codes This machine Condition Settings Sub Address Code Polling Memory Creating a Memory Box for F-Code TransmissionHow F-code polling memory works Your machine Other machine Using F-Code Polling Memory Scanning a document into an F-code polling memory boxCode Polling Memory As the scanning destination Procedure for F-Code Polling Checking and clearing document data in a memory box Corpo.Tps Xerox Group Code Confidential Transmission Code Confidential Transmission Code Confidential Transmission Press Start to Print DATA. appears If the print PIN is not correct, the message PIN is not Code Relay Broadcast Transmission Code Relay Broadcast TransmissionRelay machine your machine Using the F-Code Relay Broadcast Function Your machine is the relay machine Using an Extension Phone Using the F-Code Relay Request FunctionUsing an Extension Phone Convenient Methods of Use Sending a Fax after Talking Manual Transmission Send keyFAX key Using an Extension Phone to Receive a Fax Changing the reception mode to Manual ReceptionPress the Custom Settings key Touch the Receive Mode key When the extension phone is in Fax mode Reception mode is set to Manual ReceptionReception begins when the other party begins transmis- sion Receiving a Fax After Talking Manual Reception Using an Extension Phone Programming Storing, Editing, and Deleting Auto Dial Keys and Programs Storing, Editing, and Deleting Auto Dial Keys and Programs Storing One-Touch Keys Corporation Fax No Mode Use the numeric keys to enter the fax number Passcode max digits Transmission speed International correspondence mode Selections are NONE, Mode 1, Mode 2, and ModeEditing and Deleting One-Touch Keys Touch the one-touch key that you wish to edit or delete If you cannot edit or delete a one-touch key Storing a Group Key Address Review Opqrst Uvwxyz ABC Group Editing and Deleting Group Keys Touch the group key that you wish to edit or delete Deleting a group key If you wish to delete another group key, repeat steps 2, 5, Storing a Program Touch the Program Name key Touch the Settings key Special Modes Editing and Deleting Programs Touch the program you wish to edit or delete Programming, Editing, and Deleting F-Code Memory Boxes Programming, Editing, and Deleting F-Code Memory Boxes Programming an F-Code Memory Box Sub-address/passcode entry screen appears Use the numeric keys to enter a passcode max digits Setting for F-Code Polling Memory Boxes Polling Times Next Exit Setting for F-Code Relay Broadcast Memory Boxes Recipient Use the numeric keys to enter a 4-digit numberTouching the Exit key returns you to the screen 123456/987654 Editing and Deleting a Memory Box Touch the Sending Address List FAX key Touch the key of the list you wish to print Entering Characters Entering alphabetical charactersExample Xerox äÄ Touch the X key Touch the e key, r key, o key, and x key Entering Characters Touch the Space keyTouch the ä key SharpXerox ä Entering numbers and symbols Screen 1/2 Screen 2/2 Fax Unit When a Transaction Report Is Printed When a Transaction Report Is Printed Information appearing in the TYPE/NOTE column Explanation Port F-code communication Rect sub-address or other reason When an Alarm Sounds and a Warning Message Is Displayed Message screen Alarm Meaning of message Action Page/GuideViewing the Communication Activity Report Received fax cannot Add the indicated Loading Paper on When an Alarm Sounds and a Warning Message Is Displayed Self-diagnosis func Turn off the powerManual reception was Try manual recep Open Cated cover Problems and Solutions Problem Check Solution100 Xerox WorkCentre C226 User Guide Problems and Solutions Problem Check Solution Fax Unit 102 Xerox WorkCentre C226 User Guide Symbols / Numerics Index Index Index Index Index Index Index Fax 5-14,5-15 Index PCL 3-47,3-67