Xerox WorkCentre C226 manual How to place the original

Copier Operation

[ How to place the original ]

Place the original in the appropriate position shown below according to its size.

( Centre the original on the centring scale.)

Original scale

Centring scale

A4 or 8½x11	A3 or 11x17
	B4 or
	8½x14
A5 or
5½x8½

Original scale

Centring scale

A4 R or

8½x11 R

2. Ensure that the 1 Æ 1 Sided copy mode is selected.

3.Ensure that paper of the same size as the original is automatically selected (set on the Original tab). (See note*.)

The selected tray will be highlighted or the message "LOAD xxxxxx PAPER." will appear. If the message appears, load paper in a paper tray with paper of the required size. Even if the message above is displayed, copying can be performed onto the currently selected paper.

(*Note) The following requirements must be satisfied:

Originals of a standard size (A3, B4, A4, A4R, B5, B5R or A5 (11" x 17", 8-1/2" x 14", 8-1/2" x 11", 8-1/2" x 11"R or 5-1/2" x 8-1/2")) are set and the auto paper select function is enabled.

A4 Plain

B4 Recycled

A3 Plain

If originals of a size other than the sizes above are to be copied, manually select the desired paper size by touch- ing the [More...] key in the Paper Select display, and then touching the desired paper size selection key.

The selected key will be highlighted and the paper selection screen will close. To close the paper selection screen without making a selection, touch the [OK] key.

2-22 Xerox WorkCentre C226 User Guide