Xerox WorkCentre C226 manual Basic Operations, Sending a Fax, Basic Procedure for Sending Faxes

Sending a Fax

Basic Operations

This section explains basic operations such as sending and receiving faxes.

Sending a Fax

Basic Procedure for Sending Faxes

1. Make sure the machine is in fax mode.

	When the [IMAGE SEND] key light is on, the machine is
	in fax mode. If the light is not on, press the [IMAGE
/	SEND] key.
	When the network scanner option is installed, touch this
	key to return to the initial screen of fax mode or scanner
	mode, whichever mode was selected last. To switch to
	fax mode from scanner mode, touch the [SCANNER/

FAX] key (see page 5-7).

2. Load the original.

•Using the DADF: page 5-11

•Using the document glass: page 5-11

If you are using the document glass to send multiple pages, load the first page first.

NOTE: You cannot load documents in both the DADF tray and on the document glass and send them in a single fax transmission.

3. Check the original size.

Standard

If the address directory screen appears, touch the [CON- DITION SETTINGS] key to display the condition settings screen.

Resolution

		If the original is not a standard size or the size was not
Auto	A4	detected correctly, touch the [ORIGINAL] key to specify
Original		the original size. (See “Manually Setting the Scanning
		Size” on page 5-13.)

Xerox WorkCentre C226 User Guide 5-19