Xerox WorkCentre C226 Default display settings, Number of direct address keys displayed setting

Network Scanner Operation

Default display settings

You can select the initial display that appears when you press the [IMAGE SEND] key to change to scanner mode or when you press the [CLEAR ALL] key in scanner mode. Normally the initial display is set to the Condition setting screen (page 4-19).

The following three selections are available:

•Condition setting screen

•Address directory (ABC)

•Address directory (Group)

When an address directory (ABC or Group) is selected, the selected index of that address directory (page 4-22)is set as the initial screen.

When [SWITCH AUTOMATICALLY TO COPY MODE SCREEN] is selected, the dis- play will automatically switch to the copy mode screen if no action is taken in the scan/ fax mode screen for 20 seconds.

The number of direct address keys displayed setting

The number of one-touch keys displayed in each address directory screen can be changed from 6 (the normal setting) to 4 or 9.

Touch [4], [6], or [9] to select the desired number.

NOTE: For the key name that appears in each one-touch key, a maximum of 18 characters can appear when the number of one-touch keys displayed is set to 4 or 6. A maximum of 10 characters can appear when the number of one-touch keys displayed is set to 9.

Initial resolution setting

This is used to change the default resolution setting for transmission in network scan- ner mode. The default resolution is initially set to "LOWER". To change the setting, touch the desired resolution key.

•[LOWEST]

(B/W: 150 x 150dpi, Colour: 100 x 100dpi)

•[LOWER]

(B/W: 200 x 200dpi, Colour: 150 x 150dpi)

•[STANDARD]

(B/W: 300 x 300dpi, Colour: 200 x 200dpi)

•[HIGHER]

(B/W: 400 x 400dpi, Colour: 300 x 300dpi)

•[HIGHEST]

(B/W: 600 x 600dpi, Colour: 600 x 600dpi)

4-66 Xerox WorkCentre C226 User Guide