Xerox WorkCentre C226 manual Selecting the Original Size, Using the Dadf Using the document glass

Selecting the Original Size

2.Enter the original size.

If the original size is a standard size, touch the appropriate original size key.

A5 A4

OK

[MANUAL] and the original size key you touched are highlighted.

A5R A4R AB

B5 B4 Inch

B5R A3

Standard Size Size Input

If you wish to select an inch size, touch the [AB/INCH] key and then touch the desired original size key.

			OK
51/2X81/2	81/2X13
1/2X 1/2	1/
5 8 R	82X14		AB
81/2X11	11X17
		Inch
81/2X11R

[INCH] is highlighted and inch size keys are displayed. To return to the AB palette, touch the [AB/INCH] key once again.

Standard Size Size Input

If the original size is a non-standard size, touch the [SIZE INPUT] tab and then

enter the X (width) and Y (length) dimensions of the original with the or key.

	X						OK
			Y
					(64 432)
		X		420
					mm
					(64 297)
		Y		297
					mm
Standard Size						Size Input

The X dimension (width) is initially selected.

Touch the Y ( ) key and enter the Y dimension (length).

The range of original sizes that can be entered is as fol- lows.

	Using the DADF	Using the document glass
X (horizontal	143 to 432 mm	64 to 432 mm
direction)	(5-3/4" to 17")	(2-1/2" to 17")
Y (vertical	130 to 297 mm	64 to 297 mm
direction)	(5-1/8" to 11-3/4")	(2-1/2" to 11-3/4")

3.Touch the [OK] key.

You will return to the initial screen.

Xerox WorkCentre C226 User Guide 2-9