Xerox WorkCentre C226 manual PIN 5-digit identification number, Notify Job End, Defaults

Printer Operation

[PIN] (5-digit identification number)

A PIN number can be programmed in the printer driver for increased security when printing jobs from the hold job list. When this is done, the PIN number must be entered at the machine's operation panel to print a job in the job hold list.

•"Hold After Print" mode with password:

Password entry on the operation panel of the printer is needed for additional printing of the hold job.

•"Hold Before Print" mode with password:

Password entry on the operation panel of the printer is needed to start printing.

•"Proof Print" mode with password:

Password entry on the operation panel of the printer is needed to print the remaining sets after printing one set. The first set is printed without password entry.

Default setting: Normal Print

Notify Job End

Select whether or not you wish to be notified about printing completed.

This function only operates when the Xerox Print Status Monitor is running. Even if selected, the function will not operate when the Xerox Print Status Monitor is not running.

Default setting: Selected

Defaults

Returns the settings in the job control window to the default settings.

3-24 Xerox WorkCentre C226 User Guide