Xerox WorkCentre C226 manual Auto

Copier Operation

3. Load transparency film into the Bypass Tray.

Remove any paper already in the Bypass Tray before loading the transparency film. (To load paper in the Bypass Tray, see page 1-23.)

4.Touch the [More...] key in the Paper Select display and select the transparency film loaded in the Bypass Tray.

		Auto
	A4
		Original
	Plain
		Auto
		Exposure
Heavy Paper
Transparency		Paper Select
		100%
		Copy Ratio

Touch the [TRANSPARENCY] key.

5.Touch the [SPEED MODE] key or the [QUALITY MODE] key for the transparency film.

Please Select Transparency Mode.

OK

Speed Mode

Quality Mode

Extra Size Basic Setting

SPEED MODE is for fast printing.

QUALITY MODE is for a high quality image.

After touching either key followed by the [OK] key, you will return to the main screen of copy mode.

About the steps that follow

If a DADF is being used, see page 2-13.If the document glass is being used, see page 2-21.

To cancel the TRANSPARENCY INSERTS function, touch the [TRANSPARENCY INSERTS] key again on the SPECIAL MODES screen.

NOTE: When the copy job is finished, remove any transparencies that remain in the Bypass Tray.

2-46 Xerox WorkCentre C226 User Guide