Xerox WorkCentre C226 manual Faxing a Two-Sided Original

Sending a Fax

Faxing a Two-Sided Original

Follow the steps below to automatically send a two-sided document.

1. Make sure the machine is in fax mode.

	When the [IMAGE SEND] key light is on, the machine is
	in fax mode. If the light is not on, press the [IMAGE
/	SEND] key.

When the network scanner option is installed, touch this key to return to the initial screen of fax mode or scanner mode, whichever mode was selected last. (Pressing the [IMAGE SEND] key in a copy screen or printer screen

returns you to the initial screen of fax mode.) To switch to fax mode from scanner mode, touch the [SCANNER/FAX] key (see 8 on page 5-7).

2.Place the original in the DADF tray (see“Using the DADF” on page 5-11).

3.Touch the [ORIGINAL] key.

Standard

Resolution

Auto A4

Original

If the address directory screen appears, touch the [CON- DITION SETTINGS] key to display the condition settings screen.

When you touch the [ORIGINAL] key, check the original size that appears in the key. If the size was not detected correctly, specify the correct size. (See “Manually Setting the Scanning Size” on page 5-13.)

4.Touch the [2-SIDED BOOKLET] key or the [2-SIDED TABLET] key as appropriate for the original you loaded.

Speaker Redial

al Size				Ok
	Manual
		2-Sided	2-Sided
		Booklet	Tablet

5. Touch the [OK] key.

You will return to the initial screen.

ker Redial

Ok

L

ED 2 SIDED

Xerox WorkCentre C226 User Guide 5-23