Xerox WorkCentre C226 manual Setting the paper size when an extra size is loaded

General Information

3.Select the paper tray for which the setting is to be made. (For the tray numbers, see the tray specifications on page 1-30.)

Type / Size

Tray 1 Plain /

If the desired tray is not on the display, use or key to scroll the display until it appears.

Tray 2 Plain /

4. Select the type of paper that was loaded in the tray.

The currently selected paper type will be highlighted. To change the setting, touch the desired type.

Plain Letter Head

Pre-Printed Pre-Punched

Recycled Colour

NOTE: Special paper such as transparency film, envelopes, and postcards can only be used in the Bypass Tray.

5. Touch the [OK] key to complete the setting.

Setting the paper size when an extra size is loaded

When a paper tray is set to "extra", this informs the machine that an extra size is being used. It does not inform the specific size. To enter the specific size of the paper loaded, follow the steps below.

For example, if 8-1/2" x 11" size paper is loaded in the tray (with the size slide set to "extra"), you can use this procedure to set the paper size recognized by the machine to 8-1/2" x 11" size. If you loaded an irregular size of paper, you can enter the dimen- sions of the paper.

To set the paper size when an extra size of paper is loaded in the Bypass Tray, see page 1-35.

1.Perform steps 1 through 4 of "Setting the paper type" at left.

2.Touch the key to display the paper size setting screen.

Custom Settings
Tray 3 Type/Size Setting						OK
Extra Size
							2/3
	A3	B4	A4	A4R	B5
	B5R	A5	8K	16K	16KR
	11X17	81/2 X14	81/2 X13	81/2 X11	81/2X11R
	51/2 X81/2	71/4X101/2R	EXTRA

1-34 Xerox WorkCentre C226 User Guide