Xerox WorkCentre C226 manual Touch the A3 FULL-BLEED key on the Image Edit menu screen

Image Edit Menu

1. Touch the [A3 FULL-BLEED] key on the IMAGE EDIT menu screen.

Single Colour

A3Mult

Full-Bleed Enla

The [A3 FULL-BLEED] key will be highlighted to indicate that the function is turned on, and the full-bleed icon

( ) will appear in the upper left of the screen.

2.Touch the [OK] key on the IMAGE EDIT menu screen. Return to the SPECIAL MODES screen.

3.Touch the [OK] key on the SPECIAL MODES screen. Return to the main screen of copy mode.

4.Load A3W (12" x 18") copy paper into the Bypass Tray.

Adjust the Bypass Guide to A3W width before loading the paper. Remove any paper remaining in the tray.

Pull out the tray extension and wire extension (see page 1-23).

5.Touch the [More...] key in the Paper Select display and then select the paper type in the Bypass Tray.

	Ready To Copy.								0
						Interrupt
1.		A4	Plain		A3W			Auto
							Original
2.		B4	Recycled		Plain
								Auto
							Exposure
3.		A3	Colour	Heavy Paper
4.		A4R	Plain	Transparency			Paper Select
				Envelope			100%

Copy Ratio

Touch the [PLAIN] key or the [HEAVY PAPER] key.

If you touched the [HEAVY PAPER] key, touch the [HEAVY PAPER1] key or the [HEAVY PAPER2] key as appropriate for the weight of the paper you loaded (see step 3 on page 1-36).

About the steps that follow

See page 2-21.

Extend the copy receptacle and then begin copying.

To cancel the A3 (11 x 17) FULL-BLEED function, touch the [A3 FULL-BLEED] key again on the IMAGE EDIT menu screen (step 1).

Xerox WorkCentre C226 User Guide 2-67