Xerox WorkCentre C226 manual Condition settings screen, Fax Mode Condition Settings Screen

Fax Mode (Condition Settings Screen)

Condition settings screen

The display is initially set (factory setting) to show the following condition settings screen as the initial screen.

1

Ready To Send.

14

Auto

13 Exposure

Standard

12 Resolution

Auto

11 Original

2	3	4
	Speaker	Redial
	Fax Memory:100%	Address	5
	Auto Reception
		Directory
		Sub Address	6
	Special Modes	Address Review	7
	Scanner	Fax	8

109

1Message display Messages appear here to indicate the current status of the machine. The icon at left () indicates fax mode.

2Memory and This shows the amount of fax memory that is free and the currently selected reception

reception mode	mode.
display

3[SPEAKER] Touch the [SPEAKER] key to dial and transmit a fax manually.

During dialing it changes into the [PAUSE] key, and after touching the [SUB

ADDRESS] key it changes into the [SPACE] key.

4[REDIAL] Touch this key to redial the number most recently dialed with the numeric keys or a one-touch key. After dialing, this key changes into the [NEXT ADDRESS] key.

5[ADDRESS Touch this key to display the address directory screen. Touch this key when you want DIRECTORY] to use an auto-dial number (one-touch dialing or group dialing).

6[SUB ADDRESS] Touch this key to enter a sub-address and passcode when using F-code transmission (page 5-56).

7[ADDRESS When performing a broadcast transmission (page 5-30),touch this key to check your REVIEW] selected destinations. The selected destinations will appear and any unneeded desti-

nations can be deleted.

8[SCANNER/FAX] This key appears when the network scanner option is installed. Touch the key to switch between the scanner screen and the fax screen. When the fax screen appears, "FAX" is highlighted. When the scanner screen appears, "SCANNER" is highlighted.

Xerox WorkCentre C226 User Guide 5-7