Xerox WorkCentre C226 Transparency film with insert sheets, 2 x 11 or 8-1/2 x 11R as the transpar

Special Modes

About the steps that follow

If a DADF is being used, see pages 2-13through 2-19.If the document glass is being used, see pages 2-21through 2-24.

To cancel the CENTRING function, touch the [CENTRING] key again on the SPECIAL MODES screen (step1).

Transparency film with insert sheets

Originals (1-sided)

4

3

2

1

Originals (2-sided)

When copying onto transparency film, blank insert sheets can be placed between transparent sheets.

Example: Inserting insert sheets between transparencies

•Insert sheets cannot be copied on in any mode.

•This mode can be selected only in the 1-sided to

			4	1-sided and 2-sided to 1-sided modes.
				• A multiple number of copies cannot be selected
		3
				in this mode.
	2
				• Transparency film must be fed from the Bypass
1
				Tray.
			Insert sheets	• Insert sheets must be the same size (A4 or A4R
				(8-1/2" x 11" or 8-1/2" x 11"R)) as the transpar-

ency film.

For two-sided originals, this is only possible when using a DADF.

•For best results, use Xerox-recommended trans- parency film.

Before performing the following procedure, touch the [More...] key in the Output dis- play of the main screen of copy mode to display the OUTPUT settings screen (page 2- 18), and then touch the [LEFT TRAY] key* to set the output tray to the left tray*.

*If the optional Saddle Stitch Finisher is installed, touch the [FINISHER TRAY] key to set the output tray to the finisher tray.

1.Touch the [TRANSPARENCY INSERTS] key on the SPECIAL MODES screen of the Special Modes tab.

Copy

Transparency

Inserts

The [TRANSPARENCY INSERTS] key is highlighted to indicate that the function is turned on, and the transpar-

ency inserts icon ( , etc.) appears in the upper left of the screen.

2.Touch the [OK] key on the SPECIAL MODES screen. Return to the main screen of copy mode.

Xerox WorkCentre C226 User Guide 2-45