Xerox WorkCentre C226 manual Loading paper in the stand/1-Tray Unit/3-Tray Unit

General Information

2.Lower the two fusing unit pressure adjusting levers marked A and B in the illustration.

A

B

Normal position

B: Front side of	Lower pressure	A: Rear side of
	position
fusing unit		fusing unit

3. Gently close the Duplex Bypass/Inverter Unit.

If the machine is not equipped with a Duplex Bypass/

Inverter Unit, close the side cover.

Loading paper in the stand/1-Tray Unit/3-Tray Unit

Upper tray / middle tray / lower tray*

Up to 500 sheets of paper recommended for colour or Xerox-recommended plain paper can be loaded in these trays. The method of loading paper is the same as for Paper Tray 1 in the main unit (see the explanation on page 1-21).

* The stand/1-Tray Unit only has the upper tray.

NOTE: If the size of paper being loaded is different from the previous size, or is an extra size, or if the paper type is different from the previous type, you must change the paper tray settings in the custom settings. Change the settings as explained in “Setting the paper type (except the Bypass Tray)” on page 1-33and “Setting the paper size when an extra size is loaded” on page 1-34.

1-28 Xerox WorkCentre C226 User Guide