Xerox WorkCentre C226 manual Printing using optional peripheral equipment

Printer Operation

5.If you need to adjust the colour image quality, perform the following step. If you do not need to adjust the image quality, go directly to step 6.

To adjust the colour image quality, click the [Color Adjustment] button. The following screen will appear. Use the [Color Balance] field to adjust the saturation of colour images, and strengthen or weaken the RGB (red, green, and blue) colour components.

Use the [Image] field to adjust the brightness and contrast of colour images. (page 3-38)

When finished, go to step 6.

6.Click the [Paper] tab.

Make sure that the paper size is correct. Next, configure the "Paper Selection" settings. "Auto Select" is normally used for both "Paper Source" and "Paper Type". When you have completed the settings, click the [OK] button to close the printer properties window.

NOTE: Using the Bypass Tray

When the paper source is set to the Bypass Tray, be sure to set the paper size and paper type on the machine's operation panel. This procedure is explained on page 1- 23).

7.Click the [OK] button in the Print window in Windows 95/98/Me/NT 4.0, or the [Print] button in Windows 2000/XP/Server 2003.

Printing using optional peripheral equipment

The procedure for printing from WordPad *1 using optional peripheral equipment is explained below. If you do not have any documents created in WordPad, create a doc- ument that can be used for test printing.

*1 This is a standard accessory program in Windows.

1. Open a document created in WordPad.

3-12 Xerox WorkCentre C226 User Guide