Xerox WorkCentre C226 manual Transfer instruction

Fax Unit

4. Touch the [OK] key.

You will return to the initial screen.

aker Redial

Ok

ber

5.If needed, set the original size and other settings, and then press the [BLACK COPY START] key.

Transmission takes place according to the program.

NOTE: Select functions that cannot be stored in a program before you press the [BLACK COPY START] key in step 5. These functions include specifying the original size (see “Manually Setting the Scanning Size” on page 5-13),two-sided scanning (see “Faxing a Two-Sided Original” on page 5-23),and timer transmission (see “Setting Up a Timer Transmission” on page 5-33.)

Transferring Received Faxes to Another Machine When Printing Is Not Possible (Forwarding Function)

When printing is not possible because of a paper, toner, or other problem, you can transfer received faxes to another fax machine if that machine has been appropriately programmed in your machine. This function can be conveniently used in an office or other workplace where there is another fax machine connected to a different phone line. When a fax has been received to memory, the DATA light to the right of the [IMAGE SEND] key blinks. (See “If received data cannot be printed” on page 5-29.)

Your machine

Transfer destination

2) Printing not possible because of paper or toner problem

1) Fax transmission to your machine

3) "Transfer" instruction

using custom settings 4) Automatic dialing and transmission to programmed

transfer destination

5) Printing

Other machine

5-46 Xerox WorkCentre C226 User Guide