Xerox WorkCentre C226 manual Select cover placement, See pages 2-13through

Special Modes

2. Select cover placement.

Special Modes		OK
Covers	CANCEL	OK

Print On Front Cover?

Front Back Front+Back Yes No

Select [FRONT], [BACK] or [FRONT+BACK] on the touch panel.

3. Indicate whether the front cover sheets are copied on or not.

Cancel OK

Print On Front Cover?

Yes No

Select [YES] or [NO] on the touch panel. If [YES] is selected, the first page of the document will be copied onto the front cover sheet.

4.Touch the [OK] key on the COVER setting screen. Return to the SPECIAL MODES screen.

5.Touch the [OK] key on the SPECIAL MODES screen. Return to the main screen of copy mode.

6.Load the cover paper to be used into the Bypass Tray.

Load the same size of paper as the paper to be used for the copy job. If the Saddle Stitch Finisher is to be used for stapling, heavy stock cannot be used for the covers (see page 1-32).Paper within the range of the stapler must be used.

About the steps that follow

See pages 2-13through 2-19.

NOTE: Be sure to place the originals in the DADF tray of the DADF.

The document glass cannot be used for this function.

NOTES: • During cover copying, the stream feeding mode will not function even if it is turned on by the program.

•During cover copying, the pamphlet copy function (page 2-71)and the saddle stitch (pamphlet staple) function will not operate.

To cancel the COVERS function, select the COVERS function again and touch the [CANCEL] key (step 2).

Xerox WorkCentre C226 User Guide 2-49